Oster 654/655 Portable Industrial Pipe & Bolt Threading Machine-2" Capacity

Capacity
Bolt Range	1/4" to 2"
Pipe Range	1/8" to 2"

 

General Specifications	654	655
Height	17.25"	17.25"
Length	39.5"	39.5"
Width	17.5"	17.5"
Net Weight	265 lbs.	260 lbs.
Shipping Weight	305 lbs.	300 lbs.

The Oster 655 With Slide-In Tools

Pipe Masters Have had years of service on the toughest proving ground - job and maintenance shops. They have consistently turned out good threads while standing up under the most rigorous conditions. Flat machine ways mounted on a solidly built fabricated steel base are two reasons for the Pipe Master's durability.

Roll-Over Headstock for Pipe Thread Machines

Roll-Over Headstock! Exclusive "Roll-Over" headstock, standard on all Pipe Master machines, allows fast, easy access to the motor compartment. Removing a single pin allows the complete headstock to be pivoted up and back out of the way to expose motor, brushes and switch box for easy maintenance.

654 – Equipped with Swing-Over Tools

The Oster 654 is equipped with special Swing-Over tools for convenient Pipe Threading Operations. The Oster Quad II Swing-Over features an automatic opening system which guarantees the proper length for NPT threads. Also features through die-head oiling.

654/655 Thread Machine Features

• Flat Ways
• Fabricated Steel Construction
• Patented Chuck Jaw Inserts
• "See Thru" Cutter furnished with the Oster 654 shows exactly where the cut will take place.
• Thru-the-head coolant system on the Oster 654 Machine.
• Automatic or Manual Opening Die Head
• Attachment for "Breaking" Fittings (Optional)

Standard Equipment Furnished

• Motor - SINGLE PHASE Universal, Reversible, variable speed - specify either 120 or 240 volt. AC, 1 phase 50-60 Hz. Rated 1/2HP, develops up to 2HP Spindle Speeds(No Load) - Standard 38 RPM, optional 60 RPM.
• Switch - Heavy duty, reversing. Safety foot switch also included. Operator must have foot on this switch for machine to operate.
• Diehead - ONE, QUAD II QUICK-OPENING type - capacity 1/8" thru 2" pipe.
• Dies - TWO sets, High Speed Steel Pipe Dies (Symbol Quad) Right-Hand, 1 set (1/2" and 3/4"), 1 set (1" thru 2").
• Reamer - Detachable, Blade type
• Cutter - Roller type, self centering. (Blade type available with 655).
• Front Chuck - Fast, Positive! Grips in both right and left hand direction. Equipped with replaceable jaw inserts.
• Rear Centering Chuck - Rotating Type - Scroll actuates 3 guides simultaneously.
• Oil Pump - Reversible, gear driven vane type with relief valve.
• Oil - Thread cutting, TWO gallons - Oster "OSTO".

Dark Thread Cutting Oil for Pipe and Bolt Threading Machines

Keep threads cool and reduce friction with Oster’s Superior Threading Oil (“OSTO”) dark thread cutting oil. Our high-quality dark thread cutting oil increases the life of your die and ensures perfect threads every time. OSTO outperforms competitors every time, preventing chip welding and formulated to have a vise-like grip on the work material. Best of all, OSTO features an infinite shelf life and never goes bad or breaks down during the threading process.

 Request for Quote