2" Rapiduction "LE Series"
Pipe And Bolt Machine
Heavy Duty High Production
Threader With Infinitely Variable Frequency Speed Drive
792LE - Incorporates Wrenchless Chuck and Quadversal "Slide-In" Die head
Quadversal Slide-In Die Head
The 792LE is supplied with the Quick Opening Quadversal Die Head as standard equipment, but it can be supplied with the "Automatic Opening" Die Head. Both types use Quad Dies, have a Blade Type Reamer and a quick open-close die adjustment lever for easy, fast die changing.
794LE - Has Wrenchless Chuck and Quadversal Swing-Over Die Head
The 794LE comes with the Quick Opening, Swing-Over Die Head as standard equipment but can be furnished with the "Automatic Opening" version. Both types use Oster Quad Type Dies and a quick open-close die adjustment lever for easy, fast die changing. The machine incorporates a swing-over, self centering roller cutter and detachable blade reamer.
The 794LE comes with the Quick Opening, Swing-Over Die Head as standard equipment but can be furnished with the "Automatic Opening" version. Both types use Oster Quad Type Dies and a quick open-close die adjustment lever for easy, fast die changing. The machine incorporates a swing-over, self centering roller cutter and detachable blade reamer.
Features - All Rapiductions
Taper Roller Bearing Mounted SpindleBall Bearing Mounted Worm Shaft
Flat Ways
Fabricated Steel Construction
Patented Chuck Jaw Inserts - 792LE/794LE
Capacities
Bolt Range
1/4" to 2"
Pipe or Nipple Range
1/8" to 2"
Specifications - 792LE/794LE
Spindle Speeds, Variable
20-210 RPM
Maximum length threaded at one setting
12-1/2"
Net Weight
900 lbs.
Shipping Weight
1040 lbs.
Standard Equipment Furnished
Motor - 5 H.P., 3 phase, 240 or 480 Volt. (Higher voltage will require the installation of a separate step up transformer)Motor Control - Variable frequency type with forward and reverse and potentiometer for speed control.
Carriage - Slide type with Feed Lever.
*Die Head - ONE, QUADVERSAL QUICK-OPENING type - capacity 1/8" thru 2" pipe, 1/4" - 2" bolt - 792LE Slide-In type, Swing-Over on the 794LE
Dies - TWO sets High Speed Steel Pipe Dies(Symbol Quad) Right-Hand, 1 set (1-1/2" and 3/4"), 1 set (1" thru 2").
Reamer - 792LE - Detachable Blade Type; 794LE - Swing Over Detachable Blade.
Cutter - 792LE - Roller type, self-centering. (Blade type available at extra cost.) 794LE - Swing over roller type.
Front Chuck - Fast, Positive! Grips in both right and left hand direction. Equipped with patented self actuated replaceable jaw inserts.
Rear Centering Chuck - Rotating Type - scroll actuates 3 guides simultaneously
Gage - Graduated scale bar and thread length gage.
Oil Pump - 115 Volt Gusher Pump internally relieved, with status light
Oil - Thread cutting, FIVE gallons - Oster "BESTOIL". *Click here for information on other Oster Die-Heads
Accessories - 792 LE
No. 02394 Blade Type Cut-0ff (For 792LE Only).
A self Centering, Blade type Cut-Off that produces a clean square cut with minimum burr.
A self Centering, Blade type Cut-Off that produces a clean square cut with minimum burr.
No. 02359 Victaulic Type Grooving Attachment (For 792LE Only).
Automatically insures correct depth, width, and distance from pipe end.
Automatically insures correct depth, width, and distance from pipe end.
Additional Accessories
No. 200 Nipple Chuck, Adjustable Stock Supports
Oster 792ALE/792AALE
Oster 792ALE
792AALE - An Automated High Production Machine with Air Operated Vise and Carriage and a Revolving Die Head
The machine shown is a 792ALE with Radial Die Head. In addition to being supplied with the Radial Head the 792ALE and 792AALE Machines can also be equipped with a Tangential Chaser Type Die Head.
Left: Radial Type Rotating Die-Head for the Oster 792ALE/792AALE
Right: Automatic Air Operated Vise for the Oster 792AALE
Capacities
Bolt Range
1/4" to 2"
Pipe or Nipple Range
1/8" to 2"
Specifications - 792ALE/792AALE
Spindle Speeds, Variable
20-210 RPM
Standard Bed |
Long Bed |
Extra Bed |
|
| 792ALE | |||
| Maximum Thread Length | 7-3/4" |
15" |
25" |
| Maximum Thread Length with auxiliary jaws for diameters under 1/2" | 7" |
14-1/4" |
24-1/4" |
| 792AALE | |||
| Maximum Thread Length | 5" |
8-1/2" |
N.A. |
| Maximum Thread Length with auxiliary jaws for diameters under 1/2" | 4-1/4" |
7-3/4" |
N.A |
| Net Weight | 1240 lbs. |
||
| Shipping Weight | 1375 lbs. |
Standard Equipment Furnished
Motor - 5 H.P., 3 phase, 240 or 480 Volt. (Higher voltage will require the installation of a separate step up transformer)Motor Control - Variable frequency type with forward and reverse and potentiometer for speed control.
Die Head - One, REVOLVING, semi-automatic, LESS ALL DIES. (Order only Symbol X1 Dies, 1 set per size required.) RIGHT- or LEFT-HAND available.
Die-Head Control - Semi-automatic tripping and resetting device with emergency hand trip.
*Vise - Quick-acting, open type, with hardened steel insert gripping jaws and auxiliary jaws for diameters under 1/2".
(Cut-off cannot be furnished.)
Stock-Stop - Automatic, adjustable.
Gage - Drum type, mounted on carriage handwheel (792A Only).
Oil Pump - 115 Volt Gusher Pump internally relieved, with status light
Oil - Thread cutting, FIVE gallons - Oster "BESTOIL". *The 792AALE Vise and Carriage are AIR OPERATED and actuated by a Remote Foot Switch.
Accessories - 792ALE/792AALE
REAM and CHAMFER TOOLS
(792ALE/792AALE)
(792ALE/792AALE)